Home Page
Handbuilt by Alex Comb


Builders of
Wood & Canvas Canoes
Wooden Kayaks and Classic Rowing Boats


 about us   merchandise   supplies   classes   repairs   links 
 videos   used canoes   events   canoes   kayaks   rowing boats 

Canoe Building Supplies

Building Plans

Full-sized section drawings are available for most of our models. Included is a pamphlet on how to build a wood canvas canoe form.

Price: $35

Canvas

Our canvas is 100% cotton Midwest Duck.
#10 x 60" width $10/lineal yard
# 8 x 72" width $14/lineal yard

Dacron

3.7 oz. x 66" width $7.25/lineal yard

Thwarts

Beautifully shaped, lightweight 22", 28" and 35" (unfinished)

Price:
Ash $30/each
Cherry $35/each

Videos

We have two videos available to help you build a wood and canvas canoe.

Price:
Building the Wood & Canvas Canoe $59.95
Building the Wood & Canvas Canoe Form $29.95

Yokes

In our canoes we offer the option of two types of carrying yokes: either a curved thwart with two fabric covered foam blocks, or a beautiful hand-carved yoke made of the same wood as the rest of the trim in your canoe. The carved yokes are comfortable as is or used in conjunction with a shoulder-padded PFD for the portage trail.

Price:
Padded Yokes $75
Hand-carved yokes $135

Canvas Filler

Linseed oil based: $55/gallon (domestic surface shipping only)

Water-based Dacron eco-fill: $85/half-gallon

Gunwales

Ash (to 18' lengths)

Price:
1" x 1" rough cut $20 each
Rabbeted and shaped $35 each

Sitka Spruce (to 18' lengths)

Price:
1" x 1" rough cut $30 each

Ribs

White Cedar

Price:
5/16" thick x 2-3/8" wide, tapered to 1-1/4". Edge shaped. Specify lengths. $10 each

5/16" x 2-3/8" x 96" rib stock $8 each

Caned Seats (unfinished)

Price:
Ash framed seats
stern: $28 each / bow: $35 each

Cherry framed seats
stern: $35 each / bow: $40 each

Planking

White cedar - 3" wide by 5/32" thick - $1.75 per lineal foot

This stock is planed to thickness and will be mostly rift-sawn (grain at up to 45 degrees from face) with some plane-sawn and some vertical-grain material. Small defects (knots, splits, wane and sap wood may be present).


Hardware

Bronze Carriage Bolts with nuts and washers
4" x 3/16" $2 each
2" x 3/16" $1.50 each

Bronze Wood Screws (flathead, square or Frearson drive)
#8 x 1" $0.25
#8 x 1-1/4" $0.30
#8 x 1-1/2" $0.35
#8 x 1-3/4" $0.40

Bronze Wood Screws (oval head, slotted)
#8 x 11/2" $0.25

Bronze ring shank nails
3/4" x 15 ga. $0.05/ea.
1/2" x 15 ga. $0.05/ea.

Brass Canoe Tacks
Oval head 11/16" (clench tacks and for attaching canvas to gunwale) $25/pound

Flat head 5/16" (for attaching canvas to stem) $5 per 1/8th pound

Brass Stem Bands
3/8" x 12' (concave back, not predrilled-screws included) $37.50

Tools
Clenching Iron - $35 (add $12 for shipping to US)
Canvas Stretching Pliers - $30
,
Scribe tool - $25

Plastic strip for bending ribs over ribbands. 2 3/8" x 8' - $15

Kits

Most of our canoe models are available in kit form. These include all the materials you need to build the canoe except primer, paint and varnish. The kit includes prepared ribs and planking, pre-bent stems, planed and shaped gunwales, all hardware, seats, etc. that you will need to finish your canoe using only hand tools. The complete kit price is at a 10% discount to our listed supplies. Please call or email for a complete list of materials for the model canoe you are interested in.

To order, send check or money order to address below. Include 6.5% sales tax if shipped within Minnesota. Add 20% for shipping and handling if within the contiguous US. Other orders, please call ahead for shipping costs.


P.O. Box 297 • Knife River, Minnesota 55609
Phone & Fax: 218.834.2506
E-mail:
 acomb@frontiernet.net 
© Copyright  Alex Comb of Stewart River Boatworks